Mesh Editing¶

Left panel¶

Click + to open each function.

Function	Instruction	Note
Simplification	After simplification, the polygon numbers, file size and detail of data will be reduced universally.	High level may cause detail loss. Set the ratio from 1 to 100, the default is 0.
Mesh Optimization	Mesh optimization can optimize the quality of the data by adding more triangles to curvature regions.
Smooth	Smooth the possible noise on the surface of the scan data.	It might remove some small details or smooth some sharp edges at the same time. Set the ratio from 1 to 100, the default is 0.
Remove Small Floating Parts	Remove small floating parts in the scan data.	From 0 to 100% where 100% is the size of the largest mesh island. Smaller islands will be removed. 0 means no operation, 100 is the maximum. The maximum value is the square of the diagonal length of the floating part/10, MAX=(L/10)².
Facial Flip	Flip the mesh model of the selected region.
Cutting Plane Tool	Define a plane by drawing a straight line. Delete the selection and close the mesh at the intersection. Use the cutting plane to align the mesh to the CSYS.
Mirror	Mirror the mesh through a plane defined by a straight line.

Icon	Function	Instruction
	Select Visible	To select data on the front view only.
	Select through	To select data all through.

Note

The other editing functions are the same as point cloud editing

Icon	Function	Instruction
	Open file	Open a file (.stl, .obj, .ply) for post processing.
	Save Data	Save scan data.
	Sketchfab Upload	Use your Sketchfab account to share the model.
	Third-party software	Save the data and open with third-party software.
	Alignment	The coordinate frame is displayed on the model when the model is rotated to the expected angle.